Telecab Elevator

Features

• Unique design maximize living spaces: With all-inclusive drive tower and enclosed cab, the unit does not require a hoistway and travels through a floor cut-out.
• Fast and easy installation: As it does not need a pit or hoistway, this home elevator involves minimal construction and can be set up easily and quickly.
• Blends into and enhances home décor: With its toned design, powder coat finish and standard almond beige or white color options, the Telecab blends smoothly into any kind of home décor.
• Dependable performance: The enclosed drive system and safety features ensure reliable operation.
• Safety features: Emergency stop and alarm buttons, battery lowering in case of power failure, telephone, non-skid platform, under-panel sensor to stop the unit if it detects an obstruction, pressure relief valve to prevent platform overload, electro-mechanical door lock and open door sensor, slack chain safety device.
  

Options

• Optional configurations: type 1, 2 or 5
• Access: left or right, with optional two-door access
• Cab size: W32” x L53” (813 mm x 1346 mm); W30” x L47” (762 mm x 1194 mm); W32” x L54” (813 mm x 1372 mm)
• Color and finish: beige or white electrostatic powder coat; clear or bronze acrylic windows
• Other options: battery power for up/down, two-door for left and right access, keyed call station, motorized door operation, hydraulic door closer, flush-mount or surface-mount call send station. The unit can also be ordered as a 12-volt DC version.

Specifications

• Load capacity: 500 lbs. (227 kg)
• Maximum travel: 23 ft (7.0 m)
• Travel speed: 20 ft/min (0.1 m/s)
• Two stops
• Continuous pressure buttons to operate the unit
• Tower: modular 8 ft (2.4 m) base guide rail assembly; roller guide support
• Control system: 115 VAC relay logic operation; 115 VAC up direction and 12 VDC down direction
• Non-skid platform
• Power supply:110 VAC, 20 A, 60 Hz, single phase
• Motor/pump: 110 VAC, 1.5 HP screw type
• Automatic battery recharging system (115 VAC)
• Drive system: 2:1 roller chain hydraulic
• Temperature operating range: –10 °C to +40 °C (14 °F to 104 °F)
• Cab access: front access only (standard)
• Cab size: standard: W30” x L46” (762 mm x 1168 mm)
• Hall calls: continuous pressure directional push buttons; keyed call/send
• Telephone
• Two interior ceiling lights
• Vacuum-formed ABS plastic trim
• Warranty: 36 months parts

Download PDF

Brochure: Telecab Elevator Brochure

Color Chart: Telecab Elevator Planning Guide

Owner's Manual: Telecab Elevator Owner's Manual